Enlaces Rápidos
Social media
Información De Contacto
Domicilio Social

Via Ponte Vecchio, 42W
16042 Carasco (GE) Italia

Sede operacional

Via Pontevecchio, 42 W
16042 Carasco (GE) Italia




+39 0185 351333


RF signal level, MER, BER in key decoding spots and PER


Digital television requires significantly fewer measurement parameters to evaluate the quality of the transmitter output signal. Broadcasters and Network Operators are increasingly interested in knowing the real performance of terrestrial DTT networks, critical especially after the introduction of SFN transmission. The DGQoS Meter allows operators to accurately verify the quality of signals received in viewers’ homes emulating the reception quality of set-top boxes and TVset.

The DGQoS Meter performs a significant amount of measurements: RF signal level, MER, BER in key decoding spots and PER.


  • Sequencing Mode
    Connects to the internet thru 2G/3G or DSL and remains in this condition. Monitors programmed channels in round robin mode.
  • Real Time mode
    Used to monitor in real time all available Datapoints. The user sends a request, the answer from the probe is sent as soon as possible which usually means a few seconds (channel power, MER, BER) to about a minute (constellation diagram, Echo pattern).
  • Efficient mode (soon available)
    Monitors programmed channels in diluted intervals, connects to the internet a few times a day but remains in listen mode in order to be called.
  • Low power mode (soon available)
    Monitors a few times a day then turns off. Connects to the internet only for downloading data.

There are 2 ways of operating the probe in normal mode: SCAN and REAL TIME. In SCAN the probe sequences thru the programmed channels and logs the data to the control center. The amount of data is user programmable. SCAN mode can be switched to REAL TIME. Once in REAL TIME the probe awaits user commands. The probe becomes a slave, it answers any user queries. The probe returns to SCAN mode automatically after a user programmed amount of time if no further command is received.

Características principales


  • DVB-T/T2
  • DVB-C
  • ISDB-T


  • 1 x F connector – 75 Ω
  • Input level: -20 to -65dBm on 75 ohms
  • resolution +-0.1 dB, precision +-1dB
  • 48 MHz to 862 MHz in DVB-T/T2 and ISDB-T/Tb
  • Bandwidth: 6, 7 or 8 MHz
  • Loopthru connector for user convenience


  • 10/100 Electrical Base-T
  • Local data on a 3’’ touchscren monitor
  • Raw TCP connection with ASCII
  • communication protocol (for OEM)


  • Input level: -20 dBm to -65 dBm
  • MER: 20 dB to >38 dB, resolution 0.1dB, precision +-1dB
  • BER pre Viterbi, resolution down to 1x10-8
  • BER post Viterbi, resolution down to 1x10-6
  • TPS monitoring and comparing of all TPS parameters (fft, coderates, guard interval etc..) included reserved TPS content


  • Signal Power Bar graph
  • SFN Window


  • Constellation Pattern
  • Channel Impulse Response
  • MER carrier per carrier
  • Percentage bars for MER,BER
  • Channel power, wireless modem reception


  • 2G/3G Mobile data connection
  • DSL
  • HTTP control interface (optional)
  • Control protocol: ASCII over raw TCP connection
  • SNMP v2C (optional)
  • FTP server for accumulated data download and firmware upgrade (optional)


  • Supply voltage: 9-14v AC/DC – 5W(7W avg during mobile trasmission)
  • Compact aluminium package(220 x 150 x 50 mm)
  • Operating temperature range: 0°C to 50°C

Renuncia de responsabilidad: antes el descargo de los documentos desde el servidor hospededero un control ha sido efectuado para verificar que las fichas sean indemnes de virus. En todo caso Elber S.r.l. declina toda responsabilidad relativa al descargo de parte del usuario de las fichas citadas y puestas a disposición, è supuesto una instalación de una aplicación antivirus ajornada de parte de quién utiliza el sitema informatico y entra de todos modos en las reglas de una correcta utilización del mismo sistema.

Verificación del hash MD5: para averiguar la integridad de las fichas de esta sección es posible utilizar los siguientes software gratuitos:
OS: Win* | Software/utility: HashOnClick (http://www.2brightsparks.com/assets/software/HashOnClick_Setup.exe)
OS: *nix | Software/utility: abrir una consola y digitear md5sum nombre_file.extensión
OS: Mac OS X | Software/utility: abrir una consola y digitear md5 nombre_file.extensión