CLEBER-XS4 DVB-S/S2 Multistream Receiver

Please come and visit us on



Cleber is the 2013 new born from Elber R&D department; it offers a powerful, flexible and modular hardware and software platform for broadcasting and contribution networks, where customers can install up to six boards with no limitations in terms of position.


Based on a Linux embedded OS, the Cleber detects the presence of the boards and shows the related control interface to the user, either through:

  • a web GUI (Guided User Interface) and
  • a Touchscreen TFT display

Two power sources (AC and DC) are always available; for the DC source, customer can chose between 22-65 Vdc or 10-36 Vdc for site or DSNG applications.

Thus Cleber can host any combination of boards, particular applications and use cases can be considered and described separately.

For satellite DVB-S2 contribution to transmitting sites in a TV or radio network, a multistream or single stream receiver is available; the XS4 board, equipped with one L-band input and four ASI outputs. The receiver can be connected with any kind of LNB and it is protected against overvoltage.

The DVB-S2 receiver features a very low end-to-end delay and reduced overall jitter even in multistream configuration (it supports up to 4 ISI simultaneous demodulation); all these features make the CLEBER-XS4 the best solution for distribution and contribution networks to feed TV and Radio Transmitters.

A very intuitive WEB interface lets the user configure and monitor the apparatus very quickly, without requirement of special software.

For further information, write to


© 2002-2013 ~ Elber S.r.l. - V.A.T.: IT-03700020104 - Codice Fiscale: 01070700107
Registered Office: Piazza Colombo, 4/15 - 16121 Genoa (GE) - Italy
Operative Head office: Via Pontevecchio, 42 W - 16042 Carasco (GE) - Italy
Registered in Genoa Chamber of Commerce, under the position N. 01070700107
Social Capital: Euro 100.000,00 e.v. - Registered in Italian R.E.A., under the position N. 250373
Web: - E-mail:


You are receiving this e-mail announcement because you are subscribed to our newsletter.
Should you decide to unsubscribe, simply click here.